electronics-journal.com
03
'23
Written on Modified on
Nexcom News
FTA 5180: NEXCOM'S 5G FRONTHAUL EDGE DEVICE VALIDATED ON PTP SYNCE ACCURACY
FTA 5180 is a high-end networking appliance in 1U rackmount form factor for edge computing applications. With Intel® Xeon® D-1700 LCC processor inside, it provides impeccable performance and enables 10 high-bandwidth interfaces for speedy connections.
NEXCOM, a leading supplier of network appliances, offers a validated solution for 5G fronthaul deployments. FTA 5180 is a 1U rackmount in a short form factor, powered by Intel® Xeon® D-1700 processor. It features ten high-bandwidth Ethernet ports, PoE++ functionality, optional support of Wi-Fi 6 and 5G, and can be deployed across diverse use cases, including 5G O-RAN DU and CU.
FTA 5180 proved its readiness to be deployed as DU and CU at 5G fronthaul by passing PTP clock offset and wire bandwidth performance tests. The 5G downlink performance of FTA 5180 reached 1.51Gb/s which is higher than the threshold value. The IEEE 1588 PTP clock offset requirements to pass the test were less than 100ns between the PTP Hardware Clock server and FTA 5180. The result reveals that the measurement average of FTA 5180 is significantly better - 29.3ns. Meaning the PTP performance of FTA 5180 is very precise and the system clock is synchronized.
Main Features
- Intel® Xeon® D-1734NT processor
- 4 x RDIMM/UDIMM socket, support ECC/non ECC, up to 256GB
- 2 x M.2 2242 Key M with SATA signal
- 6 x 10G SFP+ ports
- 2 x 10GBaseT RJ45 PoE++ port
- 2 x 2.5G RJ45 PoE++ ports
- 1 x LAN module slot
- Supports IPMI2.0
- Supports Intel® QAT
- TPM2.0 onboard
FTA 5180 is among the appliances NEXCOM will display during MWC 2023 in Barcelona. Come and check it out in Hall 5, 5A61.
